Supervision over ethernet (description and Video)
-
- Gallringsobjekt
- Inlägg: 30
- Blev medlem: lör 20 maj, 2006 19:18
- Ort: mycket söder om sverige
Supervision over ethernet (description and Video)
If your heatingroom is also too far away from your PC, here are some news:
I found a working solution to connect my Bequem Burner to my PC without direct-cable!
It works this way:
Bequem -> Lantronix comserver -> dlan (powerline) -> my PC
With this solution i can change "Önskad panntemp" and a lot of other parameters, which are usually set on the burners display, from the far!
I can also switch on and off the burner with my PC.
____________________________________________________
Burner is connected to Interface via 4 Pins on the electronic print
Interface and comserver are connected via serial cable
Comserver and dlan-adapter are connected via lan cable
Ethernet connection through powerlines in the house (possible up to 200m)
Dlan adapter connected to PC or router via lan cable
On PC installed Software: Lantronix Port redirector creates virtual serial port. This new port is set in supervision software
A video can be found at http://willsmith.badongo.com
(directory: Videos / choose "Download Video"at the bottom )
Some more Info about Supervision can be found here
I found a working solution to connect my Bequem Burner to my PC without direct-cable!
It works this way:
Bequem -> Lantronix comserver -> dlan (powerline) -> my PC
With this solution i can change "Önskad panntemp" and a lot of other parameters, which are usually set on the burners display, from the far!
I can also switch on and off the burner with my PC.
____________________________________________________
Burner is connected to Interface via 4 Pins on the electronic print
Interface and comserver are connected via serial cable
Comserver and dlan-adapter are connected via lan cable
Ethernet connection through powerlines in the house (possible up to 200m)
Dlan adapter connected to PC or router via lan cable
On PC installed Software: Lantronix Port redirector creates virtual serial port. This new port is set in supervision software
A video can be found at http://willsmith.badongo.com
(directory: Videos / choose "Download Video"at the bottom )
Some more Info about Supervision can be found here
Re: Supervision over ethernet (description and Video)
Hi Libi!söder-om-sverige skrev: I found a working solution to connect my Bequem Burner to my PC without direct-cable!
It works this way:
Bequem -> Lantronix comserver -> dlan (powerline) -> my PC
Some more Info about Supervision can be found here
I think there are a number of different solutions to extend the reach och serial cables, and to pass them through LAN etc. Should be noted there are other solutions. Passing data on the power cables can be awkward in some instances because there can be interference or other disruptances making the data transfer impossible. For those that this solution works for it should be great though! Tested and proved!
By the way, I have not had time to dig into the supervision protocols yet...
Too much other stuff to do with the house. Now 65 meters of hedge is to be planted.
Biomatic 20+, Thermias shunt + innegivare, 200l plasttunna som förråd. 150 kvm 1 1/2 plan. Bygger vacuumtransport.
-
- Gallringsobjekt
- Inlägg: 30
- Blev medlem: lör 20 maj, 2006 19:18
- Ort: mycket söder om sverige
-
- Gallringsobjekt
- Inlägg: 30
- Blev medlem: lör 20 maj, 2006 19:18
- Ort: mycket söder om sverige
I was looking now for the exact price, that i paid: 17,65 $ = 14 EUR. 11 EUR was the postage to my home.
He sells another one här pa svenska:
http://www.ebay.se/viItem?ItemId=9738355099
It was a very fast transaction, although the article came from overseas! He sent it friday, i received it here in söder om sverige on tuesday!
And: the power adapter didn´t fit. I used an old Nokia-Poweradapter with 6V/500 mA output instead
He sells another one här pa svenska:
http://www.ebay.se/viItem?ItemId=9738355099
It was a very fast transaction, although the article came from overseas! He sent it friday, i received it here in söder om sverige on tuesday!
And: the power adapter didn´t fit. I used an old Nokia-Poweradapter with 6V/500 mA output instead
-
- Gallringsobjekt
- Inlägg: 30
- Blev medlem: lör 20 maj, 2006 19:18
- Ort: mycket söder om sverige